fizzlepoof/truenas-stacks
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
db8dce8c8b409da7953abe6ea60f4f4bed710a38
truenas-stacks/docs/planning/DEPLOY_PIHOLE.md
Fizzlepoof 24c6a29273
Some checks failed
secret-guardrails / artifact-secret-scan (push) Has been cancelled
Details
secret-guardrails / gitleaks (push) Has been cancelled
Details
docs: record full Pi-hole retirement
2026-05-27 21:14:15 +00:00

16 KiB
Raw Blame History

Pi-hole Deployment Plan

Status: Historical Pi-hole design. It is no longer the active DNS source of truth. Both the PD and NOMAD Pi-hole runtimes were retired on 2026-05-27 after cutover to the Technitium trio, and the old VIP 10.5.30.53 no longer answers. Treat this document as history/reference, not the current intended DNS architecture. Architecture: 3-node HA cluster with Keepalived VIP, Unbound recursive DNS, Nebula Sync

Warning: The examples below describe the original HA Pi-hole plan. The entire Pi-hole path has now been retired. Current live DNS is Technitium on 10.5.30.8, 10.5.30.9, and 10.5.30.10; the old Pi-hole VIP 10.5.30.53 is dead. Do not treat anything below as the desired current-state DNS design.

Architecture Overview

[All LAN clients]
       ↓  DNS: 10.5.30.53  (Virtual IP — floats to whichever node is MASTER)
       ↓
 ┌─────┴──────────────────────────────────┐
 │           Keepalived VIP               │
 │           10.5.30.53/24                 │
 └──────┬──────────────┬──────────────────┘
        │              │                  │
   PD (MASTER)   N.O.M.A.D. (BACKUP1) RPi4 (BACKUP2)
   10.5.30.6       10.5.30.7           10.5.1.X
   priority 100   priority 90        priority 80
   Pi-hole :53    Pi-hole :53        Pi-hole :53
   Unbound :5335  Unbound :5335      Unbound :5335
        │              │                  │
        └──────────────┴──────────────────┘
                       ↓
              [Root DNS servers]
              (recursive — no third-party upstream)
  • Keepalived floats the VIP 10.5.30.53 to whichever node is alive with the highest priority
  • Unbound on each node acts as the local recursive resolver (replaces Cloudflare/Quad9)
  • Pi-hole on each node forwards upstream queries to its local Unbound (127.0.0.1#5335)
  • Nebula Sync (running on PD) syncs all Pi-hole configs from primary → replicas daily
  • Current live replica target is NOMAD at 10.5.30.7:8954

All nodes use network_mode: host for Pi-hole, Unbound, and Keepalived — this is required for Keepalived to manipulate the VIP and for Pi-hole to bind cleanly to port 53.

Pre-Deploy: Network Planning

  1. Pick a free static IP for the VIP — 10.5.30.53 is recommended (memorable for DNS). Reserve it in UniFi so DHCP never assigns it.
  2. Find the LAN interface name on each node: 
    # PD / RPi4:
ip link show
# Look for the interface with 10.5.1.x address — likely eth0, eno1, enp3s0, etc.
  3. Note RPi4 IP — fill in 10.5.1.X throughout this doc once known. Reserve it as static in UniFi.
  4. Verify port 53 is free on PD: 
    sudo ss -tulnp | grep ':53'
# Should show only 127.0.0.1:53 (TrueNAS loopback resolver). 
# If it shows 0.0.0.0:53, see Gotchas section.

Unbound Config (shared across all nodes)

Each node runs Unbound as a Docker container on the host network, listening on 127.0.0.1:5335.

Save this as unbound.conf in each node's appdata path (see per-node sections below):

server:
    verbosity: 1
    interface: 127.0.0.1
    port: 5335
    do-ip4: yes
    do-udp: yes
    do-tcp: yes
    do-ip6: no

    # DNSSEC
    auto-trust-anchor-file: "/opt/unbound/etc/unbound/var/root.key"
    val-permissive-mode: no

    # Performance
    num-threads: 2
    cache-min-ttl: 300
    cache-max-ttl: 86400
    prefetch: yes
    prefetch-key: yes
    minimal-responses: yes

    # Privacy
    qname-minimisation: yes
    hide-identity: yes
    hide-version: yes

    # Access control
    access-control: 127.0.0.1/32 allow
    access-control: 0.0.0.0/0 refuse

    # Root hints — download updated copy periodically
    root-hints: "/opt/unbound/etc/unbound/var/root.hints"

Download root hints (run once on each node, into the appdata path):

curl -o /path/to/appdata/unbound/var/root.hints https://www.internic.net/domain/named.cache
mkdir -p /path/to/appdata/unbound/var
# Unbound will auto-manage root.key for DNSSEC

Node 1: PlausibleDeniability (MASTER)

Repo stack dir: /home/fizzlepoof/repos/truenas-stacks/pihole/
Live stack dir: /mnt/docker-ssd/docker/compose/pihole/
Web UI port: 8953

Pre-Deploy

sudo mkdir -p /mnt/tank/docker/appdata/pihole-primary/etc-pihole
sudo mkdir -p /mnt/tank/docker/appdata/unbound-primary/var
sudo mkdir -p /mnt/docker-ssd/docker/compose/pihole
# Download root hints
sudo curl -o /mnt/tank/docker/appdata/unbound-primary/var/root.hints https://www.internic.net/domain/named.cache

docker-compose.yaml

services:
  unbound:
    image: mvance/unbound:latest
    container_name: unbound
    network_mode: host
    restart: unless-stopped
    volumes:
      - /mnt/tank/docker/appdata/unbound-primary:/opt/unbound/etc/unbound/
    healthcheck:
      test: ["CMD-SHELL", "drill @127.0.0.1 -p 5335 cloudflare.com || exit 1"]
      interval: 30s
      timeout: 10s
      retries: 3

  pihole:
    image: pihole/pihole:latest
    container_name: pihole
    network_mode: host
    restart: unless-stopped
    depends_on:
      unbound:
        condition: service_healthy
    environment:
      TZ: ${TZ}
      FTLCONF_webserver_api_password: ${PIHOLE_PASSWORD}
      FTLCONF_dns_listeningMode: "LOCAL"
      FTLCONF_dns_upstreams: "127.0.0.1#5335"
      FTLCONF_webserver_port: "8953"
    volumes:
      - /mnt/tank/docker/appdata/pihole-primary/etc-pihole:/etc/pihole
    cap_add:
      - SYS_NICE

  keepalived:
    image: osixia/keepalived:2.0.20
    container_name: keepalived
    network_mode: host
    restart: unless-stopped
    cap_add:
      - NET_ADMIN
      - NET_BROADCAST
      - NET_RAW
    volumes:
      - ./keepalived.conf:/container/environment/01-custom/keepalived.conf
    environment:
      KEEPALIVED_VIRTUAL_IPS: "#PYTHON2BASH:['10.5.30.53/24']"

keepalived.conf (PD — MASTER)

global_defs {
    router_id pihole_pd
}

vrrp_instance VI_DNS {
    state MASTER
    interface ${LAN_INTERFACE}
    virtual_router_id 53
    priority 100
    advert_int 1
    nopreempt

    authentication {
        auth_type PASS
        auth_pass ${KEEPALIVED_PASSWORD}
    }

    virtual_ipaddress {
        10.5.30.53/24
    }
}

Replace ${LAN_INTERFACE} with your actual interface (e.g. eno1). Replace ${KEEPALIVED_PASSWORD} with a shared secret used on all three nodes.

.env.example

TZ=America/New_York
PIHOLE_PASSWORD=CHANGE_ME
KEEPALIVED_PASSWORD=CHANGE_ME
LAN_INTERFACE=eno1

Deploy

Preferred PD-first flow now that the repo-side stack exists:

cd /mnt/docker-ssd/docker/compose/pihole
cp .env.example .env
nano .env
/usr/bin/bash bin/prepare_pd.sh
/usr/bin/bash bin/prepare_pd.sh --up
sudo docker logs pihole-primary --tail 20
sudo docker logs unbound-pihole-primary --tail 20

Node 2: N.O.M.A.D. (BACKUP1)

N.O.M.A.D. runs Ubuntu bare metal. Deploy via Docker Compose on the host.

Live service root: /opt/pihole-nomad
Service-local data root: /opt/pihole-nomad/data/
Web UI port: 8954

docker-compose.yaml

Same structure as PD but with different ports/paths and priority:

services:
  unbound:
    image: mvance/unbound:latest
    container_name: unbound-pihole
    network_mode: host
    restart: unless-stopped
    volumes:
      - /opt/pihole-nomad/data/unbound:/opt/unbound/etc/unbound/
    healthcheck:
      test: ["CMD-SHELL", "drill @127.0.0.1 -p 5335 cloudflare.com || exit 1"]
      interval: 30s
      timeout: 10s
      retries: 3

  pihole:
    image: pihole/pihole:latest
    container_name: pihole-nomad
    network_mode: host
    restart: unless-stopped
    depends_on:
      unbound-pihole:
        condition: service_healthy
    environment:
      TZ: ${TZ}
      FTLCONF_webserver_api_password: ${PIHOLE_PASSWORD}
      FTLCONF_dns_interface: "enp5s0"
      FTLCONF_dns_listeningMode: "SINGLE"
      FTLCONF_dns_upstreams: "127.0.0.1#5335"
      FTLCONF_webserver_port: "8954"
      FTLCONF_ntp_ipv4_active: "false"
      FTLCONF_ntp_ipv6_active: "false"
      FTLCONF_ntp_sync_active: "false"
    volumes:
      - /opt/pihole-nomad/data/pihole/etc-pihole:/etc/pihole
    cap_add:
      - SYS_NICE

  keepalived:
    image: osixia/keepalived:2.0.20
    container_name: keepalived-pihole
    network_mode: host
    restart: unless-stopped
    cap_add:
      - NET_ADMIN
      - NET_BROADCAST
      - NET_RAW
    volumes:
      - ./keepalived.conf:/container/environment/01-custom/keepalived.conf

NOMAD host prerequisite

If systemd-resolved is holding a local DNS stub on port 53, disable it before relying on NOMAD Pi-hole for LAN DNS:

sudo mkdir -p /etc/systemd/resolved.conf.d
cat <<'EOF' | sudo tee /etc/systemd/resolved.conf.d/99-pihole.conf
[Resolve]
DNSStubListener=no
EOF
sudo systemctl restart systemd-resolved
sudo ln -sf /run/systemd/resolve/resolv.conf /etc/resolv.conf

keepalived.conf (N.O.M.A.D. — BACKUP1)

global_defs {
    router_id pihole_nomad
}

vrrp_instance VI_DNS {
    state BACKUP
    interface enp5s0
    virtual_router_id 53
    priority 90
    advert_int 1

    authentication {
        auth_type PASS
        auth_pass SAME_PASSWORD_AS_PRIMARY
    }

    virtual_ipaddress {
        10.5.30.53/24
    }
}

Node 3: Raspberry Pi 4 (BACKUP2)

Install Docker (if not already installed)

curl -fsSL https://get.docker.com | sh
sudo usermod -aG docker $USER

Pre-Deploy

mkdir -p ~/pihole/etc-pihole
mkdir -p ~/pihole/unbound/var
curl -o ~/pihole/unbound/var/root.hints https://www.internic.net/domain/named.cache
sudo apt install keepalived -y

docker-compose.yaml

services:
  unbound:
    image: mvance/unbound:latest
    container_name: unbound
    network_mode: host
    restart: unless-stopped
    volumes:
      - ~/pihole/unbound:/opt/unbound/etc/unbound/
    healthcheck:
      test: ["CMD-SHELL", "drill @127.0.0.1 -p 5335 cloudflare.com || exit 1"]
      interval: 30s
      timeout: 10s
      retries: 3

  pihole:
    image: pihole/pihole:latest
    container_name: pihole
    network_mode: host
    restart: unless-stopped
    depends_on:
      unbound:
        condition: service_healthy
    environment:
      TZ: ${TZ}
      FTLCONF_webserver_api_password: ${PIHOLE_PASSWORD}
      FTLCONF_dns_listeningMode: "LOCAL"
      FTLCONF_dns_upstreams: "127.0.0.1#5335"
      FTLCONF_webserver_port: "8955"
    volumes:
      - ~/pihole/etc-pihole:/etc/pihole
    cap_add:
      - SYS_NICE

keepalived (native on RPi4)

sudo nano /etc/keepalived/keepalived.conf

global_defs {
    router_id pihole_rpi4
}

vrrp_instance VI_DNS {
    state BACKUP
    interface eth0
    virtual_router_id 53
    priority 80
    advert_int 1

    authentication {
        auth_type PASS
        auth_pass SAME_PASSWORD_AS_PRIMARY
    }

    virtual_ipaddress {
        10.5.30.53/24
    }
}

sudo systemctl enable keepalived
sudo systemctl start keepalived

Nebula Sync (on PD)

Nebula Sync syncs Pi-hole v6 configuration (gravity, blocklists, allowlists, custom DNS) from the primary to both replicas.

Add to PD's pihole docker-compose.yaml:

  nebula-sync:
    image: lovelaze/nebula-sync:latest
    container_name: nebula-sync
    restart: unless-stopped
    environment:
      PRIMARY: "http://127.0.0.1:8953|${PIHOLE_PASSWORD}"
      REPLICAS: "http://10.5.30.7:8954|${PIHOLE_PASSWORD_NOMAD},http://10.5.1.X:8955|${PIHOLE_PASSWORD_RPI}"
      RUN_GRAVITY: "true"
      FULL_SYNC: "false"
      CRON: "0 3 * * *"
    networks:
      - default
  • PRIMARY — your PD Pi-hole (note: uses 127.0.0.1 since nebula-sync is on the same host; port 8953 is the web UI, also the API port in Pi-hole v6)
  • REPLICAS — comma-separated list of secondary instances
  • CRON — syncs daily at 3 AM; force a manual sync with docker exec nebula-sync nebula-sync run
  • Each Pi-hole instance can (and should) have a different password — nebula-sync handles auth per-instance
  • Add PIHOLE_PASSWORD_NOMAD and PIHOLE_PASSWORD_RPI to your .env file

What Nebula Sync copies

  • Gravity database (blocklists, allowlists, group assignments)
  • Custom DNS/CNAME records
  • Client groups
  • Does not sync per-instance settings (web password, interface binding — these stay local)

Router Configuration (UniFi)

Point only the VIP as DNS:

  1. UniFi Network → Settings → Networks → LAN → DHCP Name Server: Manual
  2. DNS Server 1: 10.5.30.53 (VIP — floats between nodes)
  3. DNS Server 2: (leave blank or set a public fallback like 1.1.1.1 only if you want internet DNS as last resort)
  4. Save and renew DHCP leases

Why single VIP instead of listing all three IPs?
Clients round-robin across all listed DNS servers — so some queries bypass Pi-hole entirely. With Keepalived the VIP always points to exactly one live Pi-hole node, ensuring 100% of queries are filtered.

Current live endpoints

  • PD admin UI: http://10.5.30.6:8953/admin/
  • NOMAD admin UI: http://10.5.30.7:8954/admin/
  • VIP for DNS clients: 10.5.30.53

Post-Deploy

Verify VIP is working

# Check which node holds the VIP
ip addr show | grep 10.5.30.53   # Run on each node — only MASTER shows it

# Test DNS through VIP
nslookup google.com 10.5.30.53
nslookup doubleclick.net 10.5.30.53   # Should return 0.0.0.0 (blocked)

Test failover

# On PD, bring down keepalived
sudo docker stop keepalived
# Wait ~3 seconds, then check from another machine:
nslookup google.com 10.5.30.53   # Should still work — N.O.M.A.D. took over VIP
# Restore
sudo docker start keepalived

Add blocklists (on primary — Nebula Sync propagates to replicas)

List URL
Steven Black (unified) https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts
OISD Basic https://basic.oisd.nl/
Hagezi Pro https://raw.githubusercontent.com/hagezi/dns-blocklists/main/adblock/pro.txt

After adding: Tools → Update Gravity on PD, then run Nebula Sync to push to replicas.

Local DNS records

Add in Pi-hole (primary) → Local DNS → DNS Records:

Domain IP
pd.lan 10.5.30.6
nomad.lan 10.5.30.7
rocinante.lan 10.5.30.112
rpi4.lan 10.5.1.X

Nebula Sync will propagate these to all replicas.

Pangolin for admin UIs (optional)

Subdomain Target
pihole.paccoco.com http://10.5.30.6:8953 (primary)
pihole2.paccoco.com http://10.5.30.7:8954 (N.O.M.A.D.)

Use /admin/ on the public hostname for the Pi-hole admin UI path.

Enable Pangolin auth — Pi-hole admin should not be publicly accessible.

Storage Decisions

Node Path Tier Reason
PD /mnt/tank/docker/appdata/pihole-primary tank Low write frequency
PD /mnt/tank/docker/appdata/unbound-primary tank Config + root hints only
N.O.M.A.D. /opt/pihole-nomad/data Local service root Self-contained NOMAD service data
RPi4 ~/pihole/ SD card / SSD Dedicated Pi, no other concerns

Known Gotchas

  • Port 53 conflict on PD: TrueNAS binds to 127.0.0.1:53. With network_mode: host, Pi-hole will try to bind to all interfaces. Set FTLCONF_dns_listeningMode: LOCAL so it only listens on the actual LAN interface, not loopback.
  • keepalived interface name: Must match the actual NIC name on each host. Get it with ip link show.
  • virtual_router_id must be unique per VRRP group on your LAN. 53 is a good mnemonic. Confirm no other keepalived instance on your LAN uses the same ID.
  • Pi-hole v6 API port: In v6, the web UI and API both run on the FTLCONF_webserver_port. Nebula Sync and the web browser use the same port.
  • nopreempt on MASTER: The nopreempt option in PD's keepalived.conf prevents PD from immediately reclaiming the VIP when it comes back up after a failure. Remove it if you want PD to always retake MASTER on recovery.
  • Unbound cold start: Unbound takes a few seconds to start and validate DNSSEC. The depends_on: condition: service_healthy in the Pi-hole compose ensures Pi-hole waits for Unbound before starting.
Reference in New Issue View Git Blame Copy Permalink